Printable View
I picked up a bt delta elite on a smokin deal but after i noticed the barrel seemed loose . Now i checked into it a little bit and i don't think its the piece the barrel screws into so i'm wondering if this is a common problem and does anyone know of a quick fix for this issue?
the barrel doesnt screw into the gun? does the gun and barrel have threading?
The barrel is screwed in tight but theres still play from side to side in the barrel . When i unscrew the barrel the piece the barrel screws into wiggles back and forth
check if the screws are tight on the front of your gun, it could be a loose/missing screw causing this.
as big red said, it could just be that you case is loose giving it barrel movement...
if that is not the case and your marker may be miscast... try contacting BT and see what they have to say about it...
other than that, give your barrel threads a few wraps of electical tape and see if that firms it up to allow for play at least... but i have a sneaking suspicion that if you take apart your marker, build it back following the manual, that this problem might fix it'self... and if it does not, that BT will do their best to help you out... :)
ok i will try taking it apart and see if i can fix it . someone did tell me that it could be a problem with the front sight nut (the part the barrel screws into). I also just purchased a X7 with a similar issue . I did buy them from the same place so i wondered if i was buying someone else s problems . but sounds like no one thinks it could anything major
I had the same issue with my assault. what you need to do is buy the upgraded barrel mount similar to the one in the a-5 it's a 20$ part and fixes the issue perfectly
Thanks for all the info . i took the marker apart and upgraded the mount . problem solved.